Level 1
Level 1
Member since ‎08-03-2004

User Statistics

  • 34 Posts
  • 0 Solutions
  • 4 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
20 Replies
10 Replies
5 Replies

User Activity

two 5520 in fail-over configurationsoftware version 8.2(2) device manager version 6.2(5)53Creating vpn tunnels to basically identical devices has not worked reliably and im guessing that something is incorrect with the nat(0) statement.  So decided t...
wlc4402 Windows clients have very poor access to network resources inside of our network. The wlan is on a tagged interface associated to a port that is a vlan trunked port on our 6509. If a wlan that is associated to our non-tagged manag...
I have WCS and 4402 WLC and would like to deploy access points in different builds all controlled from this single WLC. I'd like each building and ap's in the building have their own WLAN/ssid.All the buildings are connected, via fiber to main campu...
I currently have a 7206 w/11 point to point t1's connect via external csu/dsu to serial interfaces on router. Six connections are shared t1 w/voice and data using external Drop and Inserts, the other five are strictly data. The voice channels are c...
I have a telco person wanting to put the management port of their phone switch on to the network in one of our remote offices. They say that it will not handle broadcast very well and it will cause it to reset.So is there a way to limit the broadcas...
Community Statistics
Member Since ‎08-03-2004 12:11 PM
Date Last Visited ‎08-18-2017 03:55 AM
Posts 34
Helpful Votes Given To