About mayurjdpatel

mayurjdpatel · 01-03-2013

Is it at all possible to channel all/some data traffic through an established ipsec tunneled connection using the RVL200?I have successfully established an ipsec connection through RVL200 and RV042 routers and are able to connect to servers/computers...

mayurjdpatel · 12-01-2010

I have been trying to install Meeting Place from the original Cisco CD ISO image onto a ESXi virtual machine and half way through the installation after providing the host name/ip details etc I am being prompted to insert the Cisco Unified Communicat...

mayurjdpatel · 01-06-2013

For some reason the DNS IP settings does not seem to work.I started looking at the option of using the Quick VPN client which appears to have a setting for enabling Remote DNS.I have setup a test user on both the RV042 and RVL200 to test if I can ove...

mayurjdpatel · 01-06-2013

Because the VPN tunnel is working very reliably and doing what it was meant to do. The Split DNS requirement is not a must have feature because the access to the web application is only required on ad-hoc basis once a month.As a side note, I was wond...

mayurjdpatel · 01-05-2013

Tekliu, thank you very much for your reply. It looks like I will have to revert to using a RDP desktop in order to access the application across the VPN to get by until I can get upgrade to newer RV0xx routers. Just one last question. Please advice i...

mayurjdpatel · 01-05-2013

Thank you for confirming that I don't need to disable DHCP in order to get Static Routing to work. I have spent quite a lot of time but for some reason just can't seem to register any static routes because when I look at the table it is not there.Bas...

mayurjdpatel · 01-05-2013

I came across the below information from the routers help page:This Router is also capable of dynamic routing (see the Dynamic Routing tab). In many cases, it is better to use dynamic routing because the function will allow the Router to aut...

Member Since	‎11-09-2010 01:45 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	11

User Statistics

User Activity

RVL200 IPSEC: Channel all or some data traffic through tunnel, possible?

Insert CUCM Disk? Install MeetingPlace on ESXi

Re: RVL200 IPSEC: Channel all or some data traffic through tunne

Re: RVL200 IPSEC: Channel all or some data traffic through tunne

RVL200 IPSEC: Channel all or some data traffic through tunnel, p

RVL200 IPSEC: Channel all or some data traffic through tunnel, p

Re: RVL200 IPSEC: Channel all or some data traffic through tunne