spremkumar

All,I have a very high level scenario wherein i got 2 core switches (collapsed core) consisting 4507...

Hi IbrahimThe best thing would be to start with the data sheet or manual of the blade server and fin...

HiHope this helpshttp://www.cisco.com/en/US/products/hw/switches/ps5023/products_tech_note09186a0080...

HiCan you format the flash and upload the IOS back onto it and try reloading the router? Backup both...

HiCan you post the output of current show interface gig x/x output and do a clear counters interface...

Hi ArunTo some extent it does overlaps and the UDLD functionality can cause a port to move into errd...

Hi Switches with different major software version nos are not compatible and wont be part of the swi...

HiSince it involves multiple features/technologies like NAT/IPSEC/CAR(rate-limit) you may have to ch...

hi Based on the information provided i feel you can connect both the links onto the same router thou...

Hi NimishAs far as i know the port supports 10/100/1000 Mbps and you can try checking the config usi...

Hi Tiagodo you have the pcs behind the firewall? do you have all the devices under same vlan if you ...

HiAs per the data sheet it does support HWIC-2T.http://www.cisco.com/en/US/products/ps10537/products...

HiAs a best practice you can have a local credentials created to avoid this kinda lock in situations...

HiI would suggest to check the baud rate setting which may have been the case here. Try accessing yo...