Hi There, I have 16 internal networks 172.28.43.0/25 & 172.28.44.0/25 numbered up etc. etc.Now i have 2 VPN connections that both need to connect to all these networks but only for 1 VPN the complete networks need to be natted to 172.26.43.x/25 172.2...
Hi there, Is it a problem to give 2 single homed fabric extenders to the same Vpc domain the same fex & Portchannel numbers? (see the attached diagram) The problem i'm having is when i move host ports from an old 6513 to the new fex'es it can take a ...
Hi There,Does anyone have a link to an overview of the Port to Asic configuration of the Cisco Catalyst 4500-XI was watching a recorded cisco live presentation and the attached slide came up. (look at bullet point 4)Unfortunately the presenter did no...
Hi,Is it possible to upgrade the IOS on a cisco 3850 stack in a non disruptive way?Reloading 1 switch at a time?Or do you need to reload the entire stack at once, like a 3750 stack?
Ok this is just weird.I have a stack of 2 3750's (WS-C3750G-24TS-S1U) both running IOS 12.2(46)SE.During the work day these switches are constantly at 62% CPU utilization. (this information comes from my monitoring system)Because i wanted to find out...
Hi Hencar,I Just had the exact the same problem with a 1921my router came with IOS 15.5.1T preinstalledAfter reading this post I decided to downgrade the software even further so i installed 15.3.3M5(MD) which is a suggested release at the moment The...
Thanks danrya,Do you maybe have any insight on the problem i'm Having:The problem i'm having is when i move host ports from an old 6513 to the new fex'es it can take a very long time (5+ minutes) before i get connection to the server againI start Pi...
