About Ravi Pande

Ravi Pande · 11-21-2019

Hello,I was studying on bgp performance and I came across "bgp fast-external-fallover" and BFD. I am confused because both achieve the exact same thing. Could anyone please let me know when we should "bgp fast-external-fallover" over BFD or vice vers...

Ravi Pande · 08-03-2019

Hello,I was reading Jeff Doyle's book Routing TCP/IP vol2 and was studying BGP path manipulation. In the book also it was mentioned about the below observed behavior.However, I was unable to understand it fully.Hence,I am testing on GNS3 and see if a...

Ravi Pande · 02-26-2019

Hello,I am studying about type2 Lsa in OSPF and many places have pseudonode mentioned. I am having hard time understanding about the pseudonode concept. Could anyone explain about this?Also, second question, how does type2 Lsa help build the spf tree...

Ravi Pande · 10-15-2018

Hello,I have the following topology for studying BGP route-reflector. So R2 I have configured as Route-reflector and R5 is Non-client and R1,R3 are clients for R2(reflector). Next, I have configured R3 as route-reflector with R4 & R2 being its client...

Ravi Pande · 02-03-2018

Hello, I was reading OSPF stub and totally stub area and see that there is default route pointing to ABR when we configure an OSPF area as stub or totally stub.However, in my topology I tried 2 ABR's and see that there is only one default route point...

Ravi Pande · 08-03-2019

R3(config-router)#neighbor 4.4.4.4 route-map localpref inR3(config-router)#neighbor 5.5.5.5 route-map localpref in

Ravi Pande · 08-03-2019

R3#sh run | s bgprouter bgp 30no synchronizationbgp log-neighbor-changesneighbor 1.1.1.1 remote-as 30neighbor 1.1.1.1 update-source Loopback0neighbor 1.1.1.1 next-hop-selfneighbor 2.2.2.2 remote-as 30neighbor 2.2.2.2 update-source Loopback0neighbor 2...

Ravi Pande · 02-28-2019

Thanks for your reply.

Ravi Pande · 10-16-2018

Hi @ADP_89 & @paul driver - Thanks for pointing that out. I configured OSPF and see that it is working fine. Could you please let me know why it was not working before. I had configured next-hop-self on both the route reflectors so I was assuming th...

Ravi Pande · 10-16-2018

Thanks for your reply. I have already added next-hop-self on R2 and R3.I have included R2 & R3 bgp config details. Yes, I do not have any IGP configured.I will configure IGP and then update this post.

Member Since	‎08-09-2016 01:26 PM
Date Last Visited	‎11-17-2021 12:48 AM
Posts	42

User Statistics

User Activity

BGP fast-external-fallover vs BFD

BGP path manipulation using local preference

OSPF Type 2 LSA

BGP Route-reflector question regarding prefixes not being seen

Default route in OSPF stub and totally stub area when we have 2 ABR

Re: BGP path manipulation using local preference

Re: BGP path manipulation using local preference

Re: OSPF Type 2 LSA

Re: BGP Route-reflector question regarding prefixes not being seen

Re: BGP Route-reflector question regarding prefixes not being seen