All, Please forgive me if there is significant information lacking. I am attempting to support a customer who apparently has at least 4 N5K's running an identical HW configuration and software versions collected by CSPC and monitored by SNTC. The i...
Hello, I'm not the administrator of this implementation and really have no visibility to any AWS portal for CSR1000v administration. The customer I'm working with has licenses that have failed since AWS forced 16.10.1b on them. The customer states t...
I'm working on an established site with 4 4500 switches installed. All are being used as access switches. All are supporting IP phones authenticating via mab. All have an unauthenticated fallback configuration. It's multi-domain auth. As best I ca...
All,
I am attempting to determine how to remediate drops that I believe are caused by buffer failures on a 2921 ISR. The relevant interface statistics are:
Last input 00:00:00, output 00:00:00, output hang never Last clearing of "show interface" ...
Customer is receiving the following:
Alarm ID Module/Submodule Instance--------------- -------------------- ---------------1 missing_assignment WCCP/svc0612 missing_assignment WCCP/svc062
I found the following forum post which was very informative:...
Yes. The customer updated those devices within the last week. "Just an additional information, the NA2 devices we upgraded to the new software 7.3(5)N1(1)" I'll check one more time if he's interested in pursuing the inconsistency problem, but just to...
So how to make sense of the deployment guide? It contains information that primarily contradicts this statement, and includes a diagram clearly showing a traditional WLC.
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/1850/hardware/guide...
So I got some additional information from the customer - he was quick to point out the 18 months of kernel uptime... and also noted that when the error occurred, this ACE, which was supposed to be the standby ACE, went active, so there were two activ...
