About mcmattcole

mcmattcole · 08-24-2012

I have been working on IP SLA fail over and as soon as I get the fail over ISP to work I have not been able to get the primary to come back online. Any help is much appreciated.cisco#show runBuilding configuration...Current configuration : 6299 bytes...

mcmattcole · 08-23-2012

I currently have Aironet 1040 AP that I am using stand alone. I am looking to have a second SSID for guest network. only problem I am having is how to get DHCP to those clients?

mcmattcole · 08-25-2012

I still have no success. I believe the error to somehow be in the tracking object since when I show ip route track-table it returns that the state is down but this is not accurate.

mcmattcole · 08-25-2012

regarding the next hop, yes. I was not exactly thorough when I cleansed the IP info. I have the next hop set to the gateway of ISP, not internal. I will try the config. I will be working on this today after 4:00 so if you are connected I would apprec...

mcmattcole · 08-25-2012

Fail over actually works by sending it to the second route/interface. However the first default route will not work any longer. Even from a fresh boot up.

mcmattcole · 08-24-2012

So I guess just to make sure I can accomplish this correctly I am attaching a quick diagram of my setup. I have two buildings connected by a wireless bridge. If I place a managed switch on just the side with the firewall is that sufficient or do I ne...

mcmattcole · 08-24-2012

So would an WS-C2960PD-8TT-L be sufficient?

Member Since	‎08-23-2012 02:31 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	8

User Statistics

User Activity

IP SLA Fail Over not failing back

Multiple SSID no DHCP on guest

IP SLA Fail Over not failing back

IP SLA Fail Over not failing back

IP SLA Fail Over not failing back

Re: Multiple SSID no DHCP on guest

Re: Multiple SSID no DHCP on guest