Hi Team , Why do we add extra 14 bytes to Cisco ASr 9kdevice MTU when connected to third party device such as aristaFor example , Arista MTU is A <> Cisco MTU is A+14 Regards,Sri
Hi Team ,I have gone through the tunneling concepts of IPV6 to IPV4 interoperability.How does this Manual tunnel ,6to4 tunnel and ISTAP tunnels are different from NAT64/DNS64 concept.I understand that NAT64/DNS64 will serve IPV6 only clients to commu...
Hi team , Would like to know , How fair it is increasing the queue size. Do we need to keep in mind any other parameter while increasing and what would be the main disadvantage while increasing the queue size. Regards,Sri
Hi Team , While coming across differencet between IOS and IOS XR platforms, I have came through that one of the IOS disadvantage like " use of a shared memory space. Since all processes used the same pool of memory, and a misbehaving OSPF proces...
Hi , Why do i need or in which senarios i need preempt to be configured on both routers. Preempt allows the router with it configured to take over the active role if it has a higher priority than the other router. I heard it is requried when we are...
Hi Harold , Thank you so much for the reply. Now it makes more sense to me of what i read in the document of nat64. Could you please direct me to the link or any document which can help me to understand NAT64 /DNS64 of both IPV6 to IPV4 especially...
Excellent writing and explanation ashirkar !!!!!!!
Appreciate your
Request you to continue to share such explanations which will be really very help full .
Hi Rajesh ,As per mu understanding these are split static routes which were used in the case of equal load balancing and unequal load balancing are required.Regards.A.