About mgrigore

mgrigore · 02-05-2004

I have a DDR router with 3 x BRIs that dials into a CAS. CAS chasis type is :cisco 2620 (MPC860) processor (revision 0x00) with 45056K/4096K bytes of memory.IOS is System image file is "flash:c2600-js-mz.122-13b.M2"I see all 6 B-channels coming in bu...

mgrigore · 01-27-2003

I have IOS c2600-js-mz.122-6c on a 2621 chasis and I am trying to make it dial out on the BRI interface. I have set 2 BRIs together to back the leased line.The dial does NOT work and what is puzzling me is the foll line:Jan 27 16:53:12 UTC: ISDN: get...

mgrigore · 12-04-2002

I am trying to have OSPF with MD5 on a fastethernet segment. Chasis type is CS2621, IOS is c2600-is-mz.120-7.T.Config looks something like:...interface FastEthernet0/1 ip ospf authentication message-digest ip ospf message-digest-key 1 md5 0 <password...

mgrigore · 06-20-2002

I have a CISCO chasis 7204, IOS c7200-js-mz.120-9.I try to create the following frame-relay traffic-shaping map class:map-class frame-relay 3072ke0 no frame-relay adaptive-shaping frame-relay cir 3072000 frame-relay bc 384000 frame-relay mincir 3072...

mgrigore · 06-17-2002

I need some help:I have to configure 3 BRIs to work together as a DDR backup for a leased-line, so a maximum of 384Kbps. The chasis is CS 2620, IOS is c2600-js-mz.121-10a. It looks line the ISDN is not brought up by the Diaer1 interface:ISDN BRI1/2: ...

mgrigore · 01-28-2003

I have changed the switch type WITHOUT reloading router, as it was not possible at the time.I have just reloaded the router and now I can see Q921 an Q931 messages when doing a debug. So, it looks like the reload has cleared the issue. It seems that ...

mgrigore · 12-04-2002

Could it be that 12.0.7 does NOT support MD5 authentication on a segment ONLY as more recent IOS do??? I have NOT configured it on the entire area...

mgrigore · 12-04-2002

It looks like the MD5 is NOT used, as already written...Dec 4 14:05:15 UTC: OSPF: Rcv hello from 10.255.0.61 area 0 from FastEthernet0/1 10.193.53.3Dec 4 14:05:15 UTC: OSPF: End of hello processingMy feeling is that this is a bug. I have deleted th...

mgrigore · 06-18-2002

1st: the router is based in Italy, I am based in Germany, so I do not think this solves the problem2. I have done a loopback call on the BRI interfaces, that is using 1 B-channel to call the other B-channel with "isdn call interface BRIx/y and I cou...

Member Since	‎06-17-2002 02:42 AM
Date Last Visited	‎11-17-2023 08:28 AM
Posts	9

User Statistics

User Activity

error by PPP multilink dial-in

DDR issue with CS2621 chasis and 12.2(6c) IOS

OSPF MD5 and IOS 12.0.7

Frame-relay class 3072 CIR error

No Free B-channels

Re: DDR issue with CS2621 chasis and 12.2(6c) IOS

Re: OSPF MD5 and IOS 12.0.7

Re: OSPF MD5 and IOS 12.0.7

Re: No Free B-channels