About FedeSaraullo

FedeSaraullo · 09-07-2018

Hello team!! Could the CVR-4SFP10G-QSFP adapter be used in a N2K-C2348TQ4F-E-----NK5-5672UP topology? Or is it only used in C6800 As I could see confusingly on the web?

FedeSaraullo · 08-07-2018

Hello team! Is the ASR1004-SIP10 supported in 16.6.4 everest? Because dENALI version doesn´t support it. Thanks!

FedeSaraullo · 04-20-2018

Hello Team! Regarding this guide, do you know if there is other device that support it?

FedeSaraullo · 04-04-2018

Hello team! We need to upgrade the ios in the Cisco 4500, we have 2 V-10GE in eol haha. A bug is hitting our equipment (CSCsj47170), so we need to do an upgrade, the currently version is 12.2.25EWA10, so i was thinking about 12.2.31SG1, what do you t...

FedeSaraullo · 03-22-2018

Hello everyone! We need to do a password recovery from a Cisco 4500, but we have tried a lot of things to do it, but without success. The command confreg 0x2142 is not valid (usage: confreg). We used this guideline: https://www.cisco.com/c/en/us/su...

FedeSaraullo · 04-20-2018

matrix compatibility: https://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/10GE_Tx_Matrix.html#_Toc511044691

FedeSaraullo · 04-19-2018

Hello Andrés! Tac recommended it for me, to find any MO:However you may find useful to suppress any fault code by following:• Click on Fabric• Click on Access Policies• Click on Monitoring Policies• Actions > Create Monitoring Policies• Create a New ...

FedeSaraullo · 04-09-2018

Hello! We have done the ROMMON and IOS upgrade! Last question, i promiss! when i install a licence, will i have to reload all system or only the active supervisor? The system is sso.Thanks!

FedeSaraullo · 04-05-2018

Hi Leo! How are you? In the release notes, it says that the rommon recommend is 12.2(31r)SGA4, but the cu has 12.2(31r)SG1, do you know wich is the minimun recommended version? THANKS!

FedeSaraullo · 04-04-2018

Thanks Reza! Can i jump directly from 12.2(25)EWA10?Will this hardware continue to work?WS-X4516-10GE WS-X4548-GB-RJ45VThanks

Member Since	‎10-19-2015 06:20 AM
Date Last Visited	‎09-25-2018 05:41 AM
Posts	66

User Statistics

User Activity

Where can i use the CVR-4SFP10G-QSFP adapter?

support sip-10 in everest

cvr-4sfp10g-qsfp only supported in 6800?

Upgrade IOS 4500 - Supervisor v-10GE

Cisco 4500 (sup v-10ge) password recovery

Re: cvr-4sfp10g-qsfp only supported in 6800?

Re: is possible to mask some faults raised in ACI dashboard?

Re: Upgrade IOS 4500 - Supervisor v-10GE

Re: Upgrade IOS 4500 - Supervisor v-10GE

Re: Upgrade IOS 4500 - Supervisor v-10GE