About nino.sehovic

nino.sehovic · 12-15-2015

Hi everyone... I need some help please. I have a site with a router and all of its ports are already taken except one. The thing is i need 2 interfaces for a customer that wants a seperate connection to the internet with NAT. Ofcourse they ill have ...

nino.sehovic · 11-20-2015

Hi everyone i can not establish a tunnel to a remote peer 77.77.88.88 The other end 77.77.88.88 works fine and has several tunnels running.This is a new site configured. Do any of zou see the problem here? The tunnel is not getting up at ALL! Thank y...

nino.sehovic · 10-25-2015

Hello guys... I have a question in which I am not so good.I started working in a big company recently and they have a Virtual server installed with a HOTSPOT on it with the gateway 10.10.1.254 (example).This server (hotspot GRASE) is used to deliver ...

nino.sehovic · 10-20-2015

Hello everyone...I have a problem with configuring a router for cisco VPN Client connections.The connection can not be established i get no erorr or anything else it only says "not connected" at the bottom left corner. I have configured the router an...

nino.sehovic · 12-16-2015

Thank you Masoud I will try it tommorow :)

nino.sehovic · 12-16-2015

The only free PORT is PORT gig0/1 which is not in production, my initial question was if there are no more free slots,if there is a possibility to do nat inside and outside on only 1 port in this case the port Gig0/1. Check the attachement again pls...

nino.sehovic · 12-16-2015

I can not connect it to Gig0/0 since its connected to a switch already and the production is going on :) I cant touch anything right now besides the gig0/1. Thats is the problem :) There are also no free ports on the switch and i do not have access t...

nino.sehovic · 12-16-2015

masoud yes the ip works like i posted earlier if i set it to loopback its np it works...

nino.sehovic · 12-16-2015

I know Masoud but u said earlier i should not put this IP on any interface...which was awkward for me...If i set it to loopback its ok but since i dont have any interfaces free I dont know where to set this IP Adddress,thats the main problem.I have o...

Member Since	‎10-20-2015 05:10 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	32

User Statistics

User Activity

NAT on 1 Physical Interface

Cant establish IPsecTunnel

WIFI Hotspot configured on a Virutal Server (GRASE)

Router VPN Client configuration

Thank you Masoud I will try

The only free PORT is PORT

I can not connect it to Gig0

masoud yes the ip works like

I know Masoud but u said