Hi Community,hoping you can help here. We currently have an ASA in place with a single outside interface (public ip address) used for our Site-to-Site VPNs, our Dynamic VPN Clients, our publicly reachable servers and, of course, our outgoing traffic....
I have a customer who needs a switch which can provide statistics regarding switched VLAN flows. the scenario is as follows -Router 1 is attached to Switch ASwitch A is trunked to Switch BSwitch B is trunked to Switch CSwitch C is attached to Route...
Greetings, we have a small switching environment. Only two 3500Xls and a 3550. We would like to configure some sort of dynamic vlan membership based on MAC address. It seems that VMPS Command can only be implemented on a larger switch. Is there a...
just a quick question. have a customer that wants to implement some VoIP for 500 users. users will attach to some 3560s with GigE uplinks to the core switches. Customer is considering 6503s or 4503s. Any rules of thumb on sizing for this number o...
i feel crazy but i don't seem to be able to find a document answering the following question. I have a customer running a 7204VXR with a 7200 engine and an NPE400. He needs a port adapter - specifically a PA-FE-TX - but needs to use dot1Q trunks. ...
Thanks Collin,so that would mean doing PBR on the WAN side router to direct the desired traffic out the fixed 2Mb link, and then doing NAT on the VDSL link for the rest of the traffic such that it has the source address of the PPPoE interface. Otherw...
Leigh,thanks for your response. Would i be able to see the layer 2 traffic statistics via SNMP despite the fact the traffic is remaining in the VLAN and being trunked through the switches?
Leigh,thanks for your response. Would i be able to see the layer 2 traffic statistics via SNMP despite the fact the traffic is remaining in the VLAN and being trunked through the switches?
stephtchoko,thanks for your response. I do understand how to configure the VMPS server, unfortunately in my environment we have no switch which can act as a VMPS Command switch (which acts as the VMPS server to the VMPS client switches). My actual ...
