Hi,I have a two N7k switches configured as ASBRs.Problem with one of them is that it sets forward address on default route it distributes into the nssa area to the ip address of it's connection in this area.This causes the default gateway loop furthe...
Hi,I have a pair of Nexus 7k configured as ABRs. Problem is that one of them seems to not flood LSA received from a NSSA area into backbone area.Topology: area 0| |abr1------abr2| | | nssa || ...
Hello,I get following error while trying to apply action-list to a policy:"Error: Error in creating link between SLB Policy and action-list"Didn't have this problem when creating whole configuration from scratch. It appeared now when trying to add ne...
Hello,I have a following configuration:sticky http-cookie STICKY_TMP STICKY_TMP cookie insert .......Cookies are sent and stickiness works. Everything is ok... Almost :-)Now I have a question regarding value of cookies created by ACE.Currently cooki...
Clearing ip ospf neighbour didn't helpBut it helped when i removed interface to r2 on asbr2 from ospf, and put it again into ospf.Everything looks good now.show ip ospf database nssa-external 0.0.0.0 detail OSPF Router with ID (10.2.1.1) (Pro...
it seems to originate a Type-7 LSA for the default-route with the P-bit set (should be clear): show ip ospf database nssa-external 0.0.0.0 adv-router 10.2.1.5 detail Options: 0x8 (No TOS-capability, Type 7/5 translation, No DC)Yes, I noticed this as ...
fischer.rolf napisano:I'm starting to believe that the problem is caused by the OSPF path selection preference rule mentioned in my first posting.I'm not sure about it. If FA would not be set, then asbr1 would reach default gateway via 10.2.1.5 (as a...
fischer.rolf napisano:This is interesting:intra 10.2.1.5 [3], ASBR, ABR, Area 0.0.0.60, SPF 51191 via 10.20.2.154, Eth1/19
intra 10.20.1.34 [1], ASBR, Area 0.0.0.60, SPF 51191 via 10.20.2.154, Eth1/19
intra 10.20.1.35 [2], ASBR, Area 0.0.0.60, SPF 51...
