Hi Ricwastufu19, The only two ways to factory reset that unit is through the IVR or the hard reset button. The IVR should work even if you lost access to the Web interface. I would suggest that you call Cisco support at 1-866-606-1866 if the unit is ...
Hi A.Flint, Usually when the config light is blinking, you save the configuration file from running to startup config then the blinking save light will disappear. The config save blink will come back after you make any changes on your switch. I do no...
Hi, Okay, thanks for the update. Is this issue only happening when you are accessing your server or does it affect anything else that you do in the network? You mentioned that the issue does not happen when the PC are in limited connectivity? If so, ...
Hi, I am still not quite sure what is the root cause at this time. You could possibly have two DHCP servers in your network as you said some PCs work and other PCs do not work. Do you know if your server is also a DHCP server? You can verify that by ...
Hi Ollyahmed, This will be different depending on what device you are talking about? I would assume you are talking about a router as that is where you would set up the dual ISP for load balancing. If this is on a Cisco Small Business router then it ...
