I have an SD-WAN test lab environment in EVE-NG where I'm hosting the vManage, vSmart, & vBond, along with various vEdge & cEdge routers.I'm running into some strange issues where the vEdges do form tunnels to each other, I am able to ping site-to-si...
Is there any way to do local command accounting in NX-OS without having to use RADIUS or TACACS?I'm testing out the Nexus Dashboard Fabric Controller automating VXLAN EVPN on NX-OS, and I'd like to see in real-time what commands the controller is sen...
I'm trying to apply SGACLs to do micro-segmentation in SD-Access.Right now I have 2 ports with statically assigned SGTs, one is "Employees" and one is "Guests", both in the same VN (subnet).I have a Policy created in DNA-C that says SGT "Guests" to "...
I'm trying to create a "multi-site" L3out in ACI via the Nexus Dashboard, but I can't figure out what specific clicks in the GUI trigger the spines in one site to form VPNv4 BGP peerings with the spines in another site. The docs that I'm reading say ...
I have a 2-site ACI fabric test lab that I'm deploying from scratch using Nexus Dashboard 2.3(2d), and Nexus Dashboard Orchestrator 4.1.2h. APICs at both sites are running 5.2(6e), and Spines are N9K-C9364C running 15.2(6e).The config appears to depl...
Hi Oliver,That did work. You're correct, in 4.1 you don't need to use the APIC at all to configure the L3outs. My mistake was that I was using the L3out object under the Application Management > Schemas > Templates, when I should have been using the ...
Hi Oliver, You're right, my NDO is 4.1.2h, the Dashboard itself is 2.3. I'll try the steps in that doc and see if it leads me anywhere. Thanks for the reply!
Sorry for the duplicate posts, the first one was originally marked as SPAM, but I wanted to post the resolution here in case anyone is searching for this problem in the future. This problem turned out to be an MTU issue in the IPN transport between t...
This turned out to be an MTU issue in the IPN transport between the spines. Small OSPF hellos we’re getting through and establishing adjacency, but then large BGP update packets would get dropped and cause session resets. The fix was to move to a dif...
