About jason_majie

jason_majie · 05-04-2017

Hi There: i have a simple setup. 1 x N9372TX-E, the 48 x 1/10G Base-T will connect to servers, and 6 x QSFP ports will be used for uplink to upper layer network equipment. all the 48 x 1/10G base-T port will have QOS marking policy, and on uplink por...

jason_majie · 08-30-2012

Hi Guys:i am a bit confused now.,I read the document, http://www.cisco.com/en/US/products/hw/switches/ps708/prod_models_comparison.html#~tab-e and http://www.cisco.com/en/US/prod/collateral/modules/ps2797/ps11878/qa_c67-648478.html[Q.I have Cisco 67...

jason_majie · 08-22-2012

Hi guys, need you advise.i am going to purchase 2 Cat6506 with Sup-2T to run VSS, since all the uplink/downlink are 10G based fiber, and no other 1G connection is required, i really dont want to buy 1G line card.Of course, ePAGP will be enabled, but ...

jason_majie · 11-29-2011

Hi All:I notices i can't not ssh out to another device from my router. SSH in from my client (putty) works fine.and not access-list attached to vty with out direction.transport output allI found this problem happened on my ASR1002 with "asr1000rp1-ad...

jason_majie · 05-03-2011

Hi there:I have a question.For example, i have a MSE3310 with 1000 client track license installed, what if i have 1001 clients, what will happen?Thanks a lot.

jason_majie · 11-09-2022

jason_majie · 11-08-2022

just unscrew it....

jason_majie · 01-13-2014

Hi Jen C.this option is only available in quote, but normally we will do up the BOM first which is the configuration. now what i do is COPY and manually delete. it is prone to mistake.tks

jason_majie · 08-26-2012

Thanks Reza, that's very helpful. I plan to use ePAGP alone, using 10G port for fasthello is a bit waisty frankly speeking.

jason_majie · 11-30-2011

Hi:Configuration:ip domain name xxx.com.sgip ssh time-out 30ip ssh authentication-retries 2access-list 10 remark "SSH Access Restriction" access-list 10 permit 123.49.101.6access-list 10 permit 10.168.2.213access-list 10 permit 10.168.4.219access...

Member Since	‎06-08-2005 09:15 PM
Date Last Visited	‎12-14-2022 01:41 AM
Posts	47
Total Helpful Votes Received	5

User Statistics

User Activity

Qos on Nexus 9300 (NXOS)

Does WS-X67XX line cards support by Sup-2T VSS?

Can i use 10G fiber port for fast hello (VSS dual active detection)

not able to ssh out from a router

MSE 3300 License Query

Re: Instructions for removing RFID CISCO 9500

Re: Instructions for removing RFID CISCO 9500

Move items

Can i use 10G fiber port for fast hello (VSS dual active detecti

not able to ssh out from a router