Hi,Can you please sugget the cable type for the card NM-1T3/E3 , when i checked in cisco the cable type metioned was CAB-E1-BNC E1, but i'm worried it has shown E1 type cable. Does the same cable CAB-E1-BNC E1 work for both E1 and E3 links.Please adv...

Hi,My requirement is to check for one-way latency of my link. I have configured ip sla "icmp echo" option for thatConfiguration ip sla 200 icmp-echo 10.97.1.11 source-interface GigabitEthernet0/1 timeout 20 threshold 20 frequency 15ip sla reaction-co...

Hi,I have two location A and B. I am connecting the both location users voice calls thru an E1 line. We have avaya 8600 PBX. All the calls from B will land in avaya PBX which in turn is connected to E1 of router A. Recently only channel 21-30 is used...

I am working on a LAN design. The total users are 26000. It is multifloor single building. I would like to know what architecture should I propose - 3tier or 2-tier. Also what should be there in core?