About michael_peters

michael_peters · 08-30-2012

Hi,we have two 2851's. One in Australia, one in NZ, IPsec VPN between the two. We have multiple subnets behind the tunnels. From all the sunbets in Aus we can reach all the subnets in NZ, except for one. From NZ we can reach all the subnets in Aus....

michael_peters · 08-31-2012

This issue was resolved in the following way. 1. a trunking/swithport configuration item on the core Sydney switch;2. the order of firewall rules on the Fortigate, which put a PAT (Port Address Translation) allow all rule prior to a rule allowing tr...

michael_peters · 08-31-2012

Hi, thanks for your reply.You are absolutely correct. I have removed the ICMP lines from my config.What my output shows is that I cannot ping the other side:It was being routed incorrectly to the internet and not into the tunnel when going from the A...

Member Since	‎08-30-2012 10:16 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	3

User Statistics

User Activity

VPN traffic not captured by IPSec access list

VPN traffic not captured by IPSec access list

VPN traffic not captured by IPSec access list