About g2metric_g2metric

g2metric_g2metric · 02-17-2014

Hello, After a hardware or software failure with my SRP527, i ordered a new Cisco router, the 887VA. The sell guy told me "yes, there is an HTTP configuration wizard if you don't want to mess with the cli".Yes... so far i had to connect with the cons...

g2metric_g2metric · 02-10-2014

Hello, I've really strange behaviors with my routers. We managed to get things running but once a week, the VPN link is down. The connection is not restart, both routers shows "connected" but are not, and we had to click on "disconnect" to get the li...

g2metric_g2metric · 08-30-2012

Hello, i'm trying to create a VPN IPSEC link between 2 offices. The VPN link is created, and i can communicate but only one way.Clients in Office B seems to have routing problem. Can you help me ?Details : Office A : - SRP527W router.- Client Network...

g2metric_g2metric · 03-22-2012

Hello, I would like my SRP527 router to manage 2 VLAN. 1 for my whole LAN and employees WIFI connections, another one for external clients to access Internet by guest WIFI SSID.- I have this Cisco SRP527W router acting as a gateway between my LAN and...

g2metric_g2metric · 02-28-2014

Hi Marty, Thank you very much for your help, today i managed to connect the SRP like you said.Now I got my first SSID working, the one for my corporate users with laptop. I simply left the WAN interface with "DHCP Address", and as it is not connected...

g2metric_g2metric · 02-27-2014

OK i see. The gateway supports VLAN yes. I bought a Draytek Vigor 2860N. At first we chose a 887VA from Cisco but there weren't any real good GUI to configure it and the CP express was buggy as hell, we had to send it back to our supplier. With our V...

g2metric_g2metric · 02-27-2014

Thank you very much for the tips ! I will try this tomorrow.However, why would i need to turn off the AP DHCP server ? When this modem router was used as a whole router, i had 2 SSID on it : - 1 for guest- 1 for my laptop usersThe first 1 was using t...

g2metric_g2metric · 02-27-2014

Hi again, Samir, i rebooted all the routers dozens of time when that happened, and it doesn't changed anything. Anyway, i called the Cisco Hotline. They could connect by VPN to RV082, but not the SRP, they didn't know why. Hardware or software failur...

g2metric_g2metric · 09-03-2012

I've finally solved the problem.During configuration of the RV, we had problem so i manually entered the routes in the advanced routing menu.That's why you can see in the screenshot that each routes are set up twice.By deleting all the entered routes...

Member Since	‎03-22-2012 01:55 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	12

User Statistics

User Activity

Cisco 887VA - CP Express 404 not found

RV082 - SRP527W - VPN behind NAT not working

[Solved]RV082 - SRP527W site-to-site VPN - routing table ?

SRP527 - Intervlan not working

RV082 - SRP527W - VPN behind NAT not working

RV082 - SRP527W - VPN behind NAT not working

RV082 - SRP527W - VPN behind NAT not working

RV082 - SRP527W - VPN behind NAT not working

RV082 - SRP527W site-to-site VPN - routing table ?