About charles.hutchinsjr

charles.hutchinsjr · 12-26-2009

I have what should be an easy one, but the solution has evaded me.I have 3 VLANs (lets say 1,2,3) and I am working with a 3560 switch. On VLAN 3 I have a WAN link to an ISP that is only 500k (satellite). I have a few users on the 3560 switch that are...

charles.hutchinsjr · 12-27-2009

Same error response."Service Policy attachment failed"I can not assign an IP to the VLAN 3 interface, as it not the native. VLAN 1 has the IP to telnet, ect... Plus we are very limited on VLAN 3 IPs and can not afford to use on infrastucture.I really...

charles.hutchinsjr · 12-27-2009

New Error Response when attempting to apply service policy to vlan 3.switch(config-if)#int vlan 3switch(config-if)#service-policy input VLAN3_POLICYService Policy attachment failed=================Config so far=================================class-m...

charles.hutchinsjr · 12-26-2009

When attempting to config, I get the follow response when trying to assign the service-policy to vlan3switch(config)#int vlan 3switch(config-if)#service-policy input VLAN3_POLICY%QoS: No action is configured in the policymap VLAN3_POLICY classmap IP_...

charles.hutchinsjr · 12-26-2009

Thanks for the reply Ganesh.I would like to stick with only limiting the VLAN. I guess I should have mentioned it in advance, each of the ports have a voice VLAN (lets say VLAN 2). So, any rate limiting to the physical port, affects the quality of th...

Member Since	‎12-26-2009 07:11 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	5

User Statistics

User Activity

VLAN Rate-Limit

Re: VLAN Rate-Limit

Re: VLAN Rate-Limit

Re: VLAN Rate-Limit

Re: VLAN Rate-Limit