About Simon Darlington

Simon Darlington · 01-21-2019

Does anyone know approximately how much disk space is required for backing up DNAC? Both Automation and Assurance. The admin guide details server requirements but mentions nothing about disk space itself. https://www.cisco.com/c/en/us/td/docs/clo...

Simon Darlington · 08-21-2017

When deploying a single EasyQoS policy to a scope that includes both 3650 and 4500 series switches in APIC-EM, there's an inconsistency with the CLI deployed. The Multimedia Conferencing class is missing from all 3650 devices, however is present on 4...

Simon Darlington · 05-10-2017

Has anyone come across the issue where no devices are visible in the device inventory?After successfully discovering devices, when clicking on the device inventory icon, indicator "Loading Device Inventory..." persists and no devices are listed. Addi...

Simon Darlington · 12-28-2018

No problem. Ok so fibre connection successfully tested a 2960 at Gig with a 1000base LX SFP to the FW unsuccessfully tested the IEM switch at 100 with a 100base FX SFP to the FW The issue may be that you have two completely different transceivers...

Simon Darlington · 12-27-2018

Hi Waterbird There's a pretty clear and concise response to this confusing area in the two solutions on this previous thread. https://community.cisco.com/t5/switching/pvst-rstp-and-rapid-pvst/td-p/1459012 Hope this helps

Simon Darlington · 12-27-2018

Hi To summarise then - the Checkpoint firewall port is Gigabit ethernet capable, configured as speed 100. - the IE-3000-8TC-E port is 10/100 capable. You have tried speed auto and 100, but are having issues. It's not clear whether you are connectin...

Simon Darlington · 12-27-2018

Hi You can switch between the fixed rj45 and sfp using the interface level command media-type sfp and media-type rj45 Hope this helps. Please rate helpful posts.

Simon Darlington · 12-26-2018

So with the restrictions you've stated, then you have a working solution for CUSTA-LAB routing via CUSTA-RTR1 towards 192.168.1.0/24 under normal operation. Under failure of CUSTA-RTR1 you're using static routes and IP SLA to route via CUSTA-RTR2 to ...

Member Since	‎06-19-2007 06:23 AM
Date Last Visited	‎03-13-2024 12:02 AM
Posts	32
Total Helpful Votes Received	57

User Statistics

User Activity

DNAC 1.2.8 - disk space requirements for backups

EasyQoS: consistency between hardware platforms

APIC-EM 1.4.1 - Devices not visible in the Device Inventory

Re: Problem to communicating FC Port Fastethernet (module:CISCO | IEM-3000-8SM=) to FW port 1g

Re: spanning-tree mode command

Re: Problem to communicating FC Port Fastethernet (module:CISCO | IEM-3000-8SM=) to FW port 1g

Re: Catalyst 2960-CG Fiber Interfaces

Re: IP SLA