About joanabotto

joanabotto · 01-06-2011

Hi,I'm setting up a Site-to-Site VPN Tunnel but I'm facing some problem I think regarding phase 1.I've pasted below part of what I think is relevant of my configuration. Could anyone help me out? Thanks in advance.access-list ACL1 extended permit ip ...

joanabotto · 10-19-2010

Hi,I'm setting up a remote access VPN on a PIX-501.When I attempt to connect through the software VPN, I'm able to connect however I'm unable to access any of the LAN resources.I've pasted below part of what I think is relevant of my configuration. I...

joanabotto · 01-07-2011

Hi Anisha,I've attached the requested output.Thanks,Joana

joanabotto · 01-06-2011

Hi Anisha,#sh run crycrypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmaccrypto ipsec security-association lifetime seconds 28800crypto ipsec security-association lifetime kilobytes 4608000crypto dynamic-map outside_dyn_map 20 match address ...

joanabotto · 10-26-2010

Hi,I had a chance to access the switch today and here's the running configuration:; J4899B Configuration Editor; Created on release #H.08.83hostname "ProCurve Switch 2650"ip default-gateway 10.0.2.254snmp-server community "public" Unrestrictedvlan 1 ...

joanabotto · 10-22-2010

Thank you Jennifer.Regards,Joana

joanabotto · 10-21-2010

Hi Jennifer,You're right there's an HP switch between the PIX and the hosts, unfortunately I don't have access to it.The switch has the IP address 10.0.2.1 and I can ping it from the router but not from the VPN.The router has the IP address 10.0.2.25...

Member Since	‎10-19-2010 03:17 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	9

User Statistics

User Activity

VPN not coming up

VPN Connects but no remote LAN access

Re: VPN not coming up

Re: VPN not coming up

Re: VPN Connects but no remote LAN access

Re: VPN Connects but no remote LAN access

Re: VPN Connects but no remote LAN access