Hi I am purchasing an SFP (GLC-SX-MM-RGD) to use with a Cisco 1572 Access Point. The SPF states it has a LC/PC (or UPC) connector. I need to connect this SFP to a blackbox media converter (LGC5211A) that has an SC connector. 1) When they do not speci...
Hi FolksWe are upgrading our CUCM from 10.5.2 to 12.5 very soon. I noticed that the VM hardware version has changed from vm8 to vm13 on the new ova. Until CUCM 12.1 the ova was still using vm8, it is only with 12.5 that it changed to vm13. I understa...
HelloWe are currently running ESXi 6.0 U3 with CUCM 10.5.2 SU4. We are looking to upgrade to 12.5, however the ESXi requirement of 6.5 is causing us some headaches with our older SAN which does not support 6.5. Is there a way to install CUCM 12.5 on ...
Hello Folks We have a relatively older system running UCS B200 M3 on 5108-AC chassis in a very large installation over 35 Blades running. We were looking to replace some of the blade servers with M4 or M5 and can't seem to get any straight answers. T...
Hi
A quick question, does the 802.1q VLAN trunking functionality exist in the LAN base image of the 3650, or do I need IP base? If anyone can also point me to an actual reference for this info, that would be great.
Thanks, Michael
Hello,The comment actually came from Cisco. We have asked them to re-verify and provide more documentation, we are still waiting for the details. I though in the interim I would ask the forum. Thanks for your input.Michael
