About david.teirney

david.teirney · 08-15-2012

I'm testing an SPA112 with firmware version "1.2.0 (042) Jul 5 2012" to see if some of the previous DTMF issues have been resolved.We have analog devices sitting behind the ATA that require DTMF tones to be played for at least 1 second to be acknowle...

david.teirney · 11-12-2012

1.2.1 (004) is the latest firmware.

david.teirney · 11-10-2012

Yes I followed the instructions provided by the SIP provider. They support AVT (like most). InBand goes through the audio channel so not part of the SIP protocol.

david.teirney · 11-10-2012

I'm not sure I understand the question. The SPA112 is configured by me to connect to the SIP provider. The SPA112 is connected to the analog phone line distribution block, which uses a star network to the various phones / devices. The REN of the SPA ...

david.teirney · 11-10-2012

I'm still using firmware version "1.2.1 (004) Jul 27 2012". I am using InBand for DTMF with the G711a codec and that seems to be working OK. Both incoming (I think via AVT) and outgoing tones are played for as long as the line generates the tone.I th...

david.teirney · 08-15-2012

I've just upgraded to the latest official version (1.2.1 (004) Jul 27 2012) and things have changed but don't appear to be much better.When using AVTthe outgoing DTMF tone is played twice. First when the key is pressed and then again once the key is ...

Member Since	‎08-15-2012 12:54 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	6

User Statistics

User Activity

SPA112 incoming DTMF tones not played for duration of keypress

SPA112 incoming DTMF tones not played for duration of keypress

SPA112 incoming DTMF tones not played for duration of keypress

SPA112 incoming DTMF tones not played for duration of keypress

Re: SPA112 incoming DTMF tones not played for duration of keypre

Re: SPA112 incoming DTMF tones not played for duration of keypre