About jsecaur

jsecaur · 03-19-2012

Our enterprise uses a corporate proxy server for all internet traffic. We have a need to push all of our CDR records to an external provider. So I have run into a few issues and have some questions.1. Can call manager 8.6 be configured with a prox...

jsecaur · 09-11-2008

Our exchange folks are moving to 2007. They are trying to put up new edge servers and have asked for outside addresses for the edge servers. Problem is that they want to source IP to be the same address as the NAT. Below is an example of the NAT. ...

jsecaur · 06-04-2008

We currently have a site with ASA5510's in active/standby. There are only two interfaces today. Inside and outside. Both interfaces are advertised to the internal network via seperate OSPF instances. We are adding a DMZ. My quesiton is;Is it acc...

jsecaur · 03-19-2012

Thanks Gordon. I plan to use SFTP and thought the middleman was the best way.-Jason

jsecaur · 09-11-2008

Thanks for the information. Is this configuration mandatory. In other words, if I do not add this NAT, will I look like the outside address of the FW?Also do you know of any good resources to test this? I am looking for something that is not using...

jsecaur · 06-04-2008

Thanks for the response. I planned to use the OSPF and advertise on the process that included the inside interface. Just wanted a second opinion.Good Day.

Member Since	‎06-22-2007 01:21 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	6

User Statistics

User Activity

CDR Records FTP to an External Server when using Corporate Proxy

Source IP address should be NAT'ed Address

Dynamic Routing to DMZ- Is this a good idea?

CDR Records FTP to an External Server when using Corporate Proxy

Re: Source IP address should be NAT'ed Address

Re: Dynamic Routing to DMZ- Is this a good idea?