So, I spent some time this weekend troubleshooting the issues I've had with the new SG300-28P switch and POE to many of my devices in the office. As a recap, I cannot utilize all of the 24 POE ports on the switch for POE purposes. Really only ev...
Also wanted to add that I do primarily resi install of Cisco/Ruckus, so most of my AP head-counts are under 6 in order to cover the home. Most of the time, I try to dedicate a small MP switch for the wireless stuff, if possible. The 7363/72 APs, ho...
It's been a while for me to post in this thread. However, I just wanted to say that similar to lokibjensen, I have continued to use the SG300 switches with various Ruckus AP's. Just be aware of some of the limitations and work-arounds with the non-...
Thanks for the info, Tom:Funny timing you have. We're actually in our offices configuring the 7363/SG300-28P combo as I type this. I'll let you know what I discover later on this evening. Thanks.
Hi Tom, Just wanted to say that the issue I was having was not resolved yet. So, I'm interested as well about this continuing issue. On a side note, guys, I'm getting in a group of Ruckus 7363 AP's to try with the SG300-28P switch. I'll let you gu...
I have 6 VLANS configured on our office network. Ideally, I'd like to arrange them in easy clusters [e.g VLAN1 on ports 1,2,3, 13, 14, and 15, etc.] However, I could not get my Ruckus Wireless access points to all come up when doing such. Only by ...
