Hi everbody,I am very interested in the new 7.3 feature HA.Also I can read that it is recommended to connect the two WLCs directly.Has anyone tried to use a L2-VLAN between them, in fact to bridge a distance between two data centres?Thank you for you...
Hi all!We are having a problem with the output of the "Interface Utilization Report" of the Health and Utilization Monitor V1.2.1.Some Interfaces have an "Rx Max%" and "Tx Max%" above 100%. That can not be correct.Here are two samples of the outp...
Hi all!We are having a problem with the output of the "Interface Utilization Report" of the Health and Utilization Monitor V1.2.1.Some Interfaces have an "Rx Max%" and "Tx Max%" above 100%. That can not be correct.Here are two samples of the output (...
Hello,we are using CampusManager v5.2.0 and have the following problem:All IP-Phones are showed by MAC-Address in the UserTracking, because we are not using CCM.Now the problem is to get the IP-Phones out of this list.We've testet to change the UserT...
Hi, I think you need this file:http://www.cisco.com/cisco/software/release.html?mdfid=280237322&flowid=7588&softwareid=280775090&release=12.4%2821a%29JA2&relind=AVAILABLE&rellifecycle=&reltype=latestIt is the LAP-Upgrade Image for 1240er Series
When running the build in Interface Utilization Quick Report, there are shown 27 of 126 Interfaces.It seems, that the number of Interfaces changes every day, when running the report.
So, the new weekly report does not show the high Utilizations anymore, but there is a new problem:In the "Report Details", there are 7 devices and 126 interfaces, but in the "Interface Utilization Summary", there are only 49 Interfaces.I have added a...
