About ArendvanDijk

ArendvanDijk · 11-14-2012

In a test environment (before going to the production environment) I've installed a router with 2 VLAN's. VLAN 1 is for the customer and VLAN 2 is for the suppliers of the customer.I want so that VLAN 2 shouldn't be able to access any device in VLAN ...

ArendvanDijk · 11-14-2012

Hi John,Thanks a lot! It's working!Final config:access-list 150 permit ip 200.200.201.0 0.0.0.255 host 200.200.200.61access-list 150 deny ip 200.200.201.0 0.0.0.255 200.200.200.0 0.0.0.255access-list 150 permit ip any anyinterface Vlan1 ip address 20...

ArendvanDijk · 11-14-2012

The network topology is very simple. The Cisco router had 4 LAN-ports. FA0 and FA1 are VLAN 1, the other two VLAN 2.### See config ###version 15.2no service padservice timestamps debug datetime msecservice timestamps log datetime msecservice password...

ArendvanDijk · 11-14-2012

Hi,Thank you for your fast reply. I've adjusted the settings, but unfortunately it does not work.First I get no IP-adress. By configuring the IP-address manually I haven't access to the Cisco (telnet and ping are blocked).Any suggestions?Thanks a lot...

Member Since	‎11-14-2012 05:47 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	4

User Statistics

User Activity

[Cisco 861] AccessList not working

Re: [Cisco 861] AccessList not working

Re: [Cisco 861] AccessList not working

Re: [Cisco 861] AccessList not working