Hi All,I'm a little bit confused about the support for Prime LMS 4.2.5... is there any date for end of Life/end of support for LMS?Should customers migrate to Prime Infrastructure or what does cisco recommend???best regards
Dear all,We have a testinstallation running Prime Infrastructure 2.2Is there any way to use netshow in Cisco Prime Infrastructure 2.2?In LMS we could run a cli command on multiple devices and export the output… I’m missing (or did not found) this fun...
Dear All,we have Fabric Manager 5.07 installed on Windows Server 2008. Everything is working fine without this little problem:Every time I start FM I get this Error message:FM standalone was unable to bind to Syslog port as It was already in use, thi...
Dear allI have a problem with logging configuration in the different contexts.logging works fine in some contexts and in others not. As far as I know the logging configuration needs to have some resources configured in the contexts but so far I wasn'...
Dear All,we have configured LMS to send emails when Interface Utilization is higher than 40% (default Threshold).The mails look like this:EVENT ID = 00012QSTIME = Wed 07-Nov-2012 03:03:54 CETSTATUS = Ac...
we are still disappointed from PI because many features from LMS don't work...is there a road map which will show up when the missing features will work?
Thanks to your very clear and perfekt troubleshooting lesson, Jim:-)A tftp server which was also configured for syslog was causing the problem. After disableing this syslog-service FM starts without any problem. Thanks you very much!Best regardsWern...
Hello JorgeNow I have added limit-resource buffer syslog minimum 10.00 maximum unlimitedto every resource class and now my logging seems to run in all contexts...However, I'm not realy sure if this is a realy useful configuration but i. g. it seems t...
Hello Jorge,yes we have remote logging server, but we don't see any syslog messages from these ACE4710 devices...We have only resource-classes configuration for 3 sticky classes configured, I have uploaded the resource-class configuration.best regard...
Hi Jorge,thanks for your reply, I will upload #sho resource usage for admin context (here logging is working fine) as well as for SPS-LB context (here logging is not working)best regardsWerner
