Hi all,I have 4948e and want to make 4x1 Gbps LACP link with AT-9724ts. The AT-9724ts has two working port channels. The 4948e config is:port-channel load-balance src-dst-macinterface Port-channel1 description portchannel to at9700 switchport switchp...
Hi all!I have 4948e and as I googled - this device does not have vlan counters. When I execute:show interfaces vlan 100 countersThe result:Counters information is not available for Vlan100Is there a way to use vlan counters or not?
Hi guys,I need a switch with 10 GbE sfp+ uplink, base ip services and q-in-q support. I think 3750-X or 3560-X are the best and the cheapest choice. Am I correct? Or there is another solution?I also wonder what are the differences between the two mod...
I found the command "counter" in interface config but I am not sure why it exists.show running-config interface vlan 3501Building configuration...Current configuration : 105 bytes!interface Vlan3501 ip address 192.168.1.1 255.255.255.252 counter ipv4...
I had to dismiss the portchannel because my time to put in production passed. I will make a vlan based load balance and later will buy another cisco to change the AT.Thank you for your answers and don't buy AT switches!;)
show vlan id 100 ? ifindex SNMP ifIndex internal Internal VLAN usage private-vlan Private VLAN information uni-vlan UNI VLAN information | Output modifiers These ara my options
