Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Can a router with IPBase license have a physical interface receive a DHCP IP address? I know it can act as a DHCP server for connected devices, but I need to know if a physical port can receive a DHCP IP address from another DHCP server.Basically, my...
I have a /23 subnet that I use for guest network access. I created an ACL to allow DNS to the DNS server and 80 and 443 to the Unifi controller for the captive portal.
This is the ACL I put in:
ip access-list extended GUEST_WIFIpermit tcp host 17...
I finally figured out how to get IPv6 on my outside and inside interfaces of my router (Cisco 2821) and on the uplink port on my switch (Cisco 3750). All three IPv6 addresses are pingable from the outside world. The switch and router are connected w...
I have a Cisco 2821 connected OSPF to a Cisco 3750. I configured my outside port
interface GigabitEthernet0/0description OUTSIDEip address dhcpip nat outsideip virtual-reassembly induplex autospeed autoipv6 address dhcpipv6 address autoconfigipv6 en...
I have a Cisco ASA 5520 connected OSPF to a Cisco 3750. Everything is IPv4 and working like a champ. I have 3 VLANs all working IPv4 just fine. I want to start playing with IPv6. I have a few questions I haven't found answers to.
1. I am not pickin...
I am now magically picking up DNS servers!! Thanks for all your help. I really appreciate it. I will edit the OP with what I was trying to do and the configuration that worked and the observations I made later today.
They are there, they just aren't being passed on to my hosts.
MikeroRouter#sho ipv6 dhcp poolDHCPv6 pool: dns-info Imported DNS server: 2001:578:3F::30 Imported DNS server: 2001:578:3F:1::30 Active clients: 0
