Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About antoniocanasmartinez
Stats
Member since
01-19-2011
4
Posts
0
Helpful
0
Solutions
Created by
antoniocanasmar
in Routing
in Routing
02-01-2011
01:41 AM
02-01-2011
01:41 AM
Hello, I've got a problem with a core 6509E and the multicast. A client has a system with cams for the physical security and they are connected to a vlan with this config: interface VlanX ip address 172.20.167.1 255.255.255.128 ip helper-address 172.20.32.7 ip pim version 1 ip pim sparse-mode end The thing is that we know that one server that shows the cams at the security office is flooding the network and the CPU CORE is over 95% always: CPU utilization for five seconds: 99%/39%; one minute: 99%; five minutes: 99% 263 644650276 567873287 1135 51.99% 55.06% 55.35% 0 IP Input Snooping statistics for Vlan17 #channels: 25 #hosts : 2 Source/Group Interface Reporter Uptime Last-Join Last-Leave 0.0.0.0/225.208.160.7 Vl17:Gi4/2 172.20.167.2 1w0d 00:00:15 01:10:36 0.0.0.0/226.208.160.7 Vl17:Gi4/2 172.20.167.2 6d11h 23:38:25 23:38:23 0.0.0.0/227.208.160.7 Vl17:Gi4/2 172.20.167.2 1w0d 00:00:11 01:10:35 0.0.0.0/229.208.160.7 Vl17:Gi4/2 172.20.167.2 1w0d 00:00:13 00:28:08 0.0.0.0/231.208.160.7 Vl17:Gi4/2 172.20.167.2 1w0d 00:00:13 01:10:35 0.0.0.0/232.20.160.7 Vl17:Gi4/2 172.20.167.2 00:01:49 1w0d 1w0d 0.0.0.0/233.20.160.2 Vl17:Gi4/2 172.20.167.2 1w0d 18:07:46 18:07:24 0.0.0.0/233.20.160.3 Vl17:Gi4/2 172.20.167.2 1w0d 00:00:13 01:10:35 0.0.0.0/233.20.160.4 Vl17:Gi4/2 172.20.167.2 1w0d 00:00:09 01:10:35 0.0.0.0/233.20.160.5 Vl17:Gi4/2 172.20.167.2 3d12h 12:56:18 12:55:59 0.0.0.0/233.20.160.7 Vl17:Gi4/2 172.20.167.2 1w0d 00:00:11 00:28:08 0.0.0.0/233.20.160.8 Vl17:Gi4/2 172.20.167.2 1w0d 00:00:15 01:10:35 0.0.0.0/233.20.160.9 Vl17:Gi4/2 172.20.167.2 1w0d 00:00:16 01:45:53 0.0.0.0/233.20.160.10 Vl17:Gi4/2 172.20.167.2 1w0d 00:00:17 01:10:37 0.0.0.0/233.20.160.12 Vl17:Gi4/2 172.20.167.2 1w0d 00:00:11 01:10:37 0.0.0.0/233.20.160.13 Vl17:Gi4/2 172.20.167.2 1w0d 18:07:48 18:07:26 0.0.0.0/233.20.160.14 Vl17:Gi4/2 172.20.167.2 1w0d 00:00:09 01:10:37 0.0.0.0/233.20.160.15 Vl17:Gi4/2 172.20.167.2 1w0d 00:00:14 01:10:38 0.0.0.0/234.20.160.5 Vl17:Gi4/2 172.20.167.2 1w0d 00:00:14 01:10:38 0.0.0.0/234.20.160.7 Vl17:Gi4/2 172.20.167.2 00:00:19 1d00h 1d00h 0.0.0.0/234.20.160.15 Vl17:Gi4/2 172.20.167.2 00:00:10 1w0d 1w0d 0.0.0.0/235.20.160.7 Vl17:Gi4/2 172.20.167.2 1w0d 00:00:16 00:28:12 0.0.0.0/236.208.160.7 Vl17:Gi4/2 172.20.167.2 1w0d 18:07:55 18:07:43 0.0.0.0/238.208.160.7 Vl17:Gi4/2 172.20.167.2 1w0d 00:00:17 00:28:12 0.0.0.0/239.255.255.250 Vl17:Gi4/2 169.254.148.213 2w5d 2w4d - 0.0.0.0/239.255.255.250 Vl17:Gi4/2 172.20.167.2 2w5d 00:00:11 1w0d router#show ip igmp snooping subscriber-rate 172.20.167.2 0.0.0.0/239.255.255.25Vl17:Gi4/2 172.20.167.2 14 pps/20 kbps (1 sec) 0.0.0.0/233.20.160.9 Vl17:Gi4/2 172.20.167.2 161 pps/1611 kbps (1 sec) 0.0.0.0/225.208.160.7 Vl17:Gi4/2 172.20.167.2 127 pps/1278 kbps (1 sec) 0.0.0.0/231.208.160.7 Vl17:Gi4/2 172.20.167.2 157 pps/1609 kbps (1 sec) 0.0.0.0/233.20.160.3 Vl17:Gi4/2 172.20.167.2 157 pps/1621 kbps (1 sec) 0.0.0.0/234.20.160.5 Vl17:Gi4/2 172.20.167.2 164 pps/1666 kbps (1 sec) 0.0.0.0/233.20.160.4 Vl17:Gi4/2 172.20.167.2 151 pps/1544 kbps (1 sec) 0.0.0.0/233.20.160.12 Vl17:Gi4/2 172.20.167.2 136 pps/1385 kbps (1 sec) 0.0.0.0/233.20.160.14 Vl17:Gi4/2 172.20.167.2 157 pps/1624 kbps (1 sec) 0.0.0.0/233.20.160.15 Vl17:Gi4/2 172.20.167.2 176 pps/1775 kbps (1 sec) 0.0.0.0/233.20.160.8 Vl17:Gi4/2 172.20.167.2 177 pps/1806 kbps (1 sec) 0.0.0.0/233.20.160.10 Vl17:Gi4/2 172.20.167.2 156 pps/1597 kbps (1 sec) 0.0.0.0/227.208.160.7 Vl17:Gi4/2 172.20.167.2 137 pps/1397 kbps (1 sec) 0.0.0.0/233.20.160.7 Vl17:Gi4/2 172.20.167.2 129 pps/1296 kbps (1 sec) 0.0.0.0/238.208.160.7 Vl17:Gi4/2 172.20.167.2 156 pps/1581 kbps (1 sec) 0.0.0.0/235.20.160.7 Vl17:Gi4/2 172.20.167.2 153 pps/1552 kbps (1 sec) 0.0.0.0/229.208.160.7 Vl17:Gi4/2 172.20.167.2 140 pps/1430 kbps (1 sec) -------------------------- Total = 2448 pps/24792 kbps (1 sec) What can I do to keep normal the CPU ?? Thanks
... View more
Labels:
Created by
antoniocanasmar
in Switching
01-19-2011
09:07 AM
01-19-2011
09:07 AM
I changed it; #sh run | inc port-channel port-channel load-balance src-dst-mac but it doesn't work, I got the same values with the iperf
... View more
Created by
antoniocanasmar
in Switching
01-19-2011
08:44 AM
01-19-2011
08:44 AM
I tried with 1, 2, 3, and even 4 laptops connected to the 4500 with 1gb access each. If I use just one laptop it gets 950Mbps, if I use two, the same speed but among both laptops, with 3 or 4 exactly the same.. The iperf server is on the server, the laptops clients I just need to know if the portchannel is really working with 4 Gb
... View more
Created by
antoniocanasmar
in Switching
01-19-2011
08:16 AM
01-19-2011
08:16 AM
Hello, I need to connect 4 physical ports of 1Gb of a 4500 switch to a dell server with team. The thing is that is doesn't work, I tried to put traffic with the iperf and never goes more that 1Gb Any suggest? Thanks! the configuration below: interface GigabitEthernet6/38 switchport access vlan 26 channel-group 3 mode active spanning-tree portfast end (the same for the 4 ports) ! interface Port-channel3 switchport switchport access vlan 26 end ! port-channel load-balance src-mac interface Port-channel3 interface Port-channel4 channel-group 3 mode active channel-group 3 mode active channel-group 3 mode active channel-group 3 mode active ! ro.cpd.cr# show etherchannel 3 summary Flags: D - down P - bundled in port-channel I - stand-alone s - suspended R - Layer3 S - Layer2 U - in use f - failed to allocate aggregator M - not in use, minimum links not met u - unsuitable for bundling w - waiting to be aggregated d - default port Number of channel-groups in use: 2 Number of aggregators: 2 Group Port-channel Protocol Ports ------+-------------+-----------+----------------------------------------------- 3 Po3(SU) LACP Gi6/38(P) Gi7/12(P) Gi7/45(P) Gi7/46(P) ro.cpd.cr#show etherchannel load-balance EtherChannel Load-Balancing Configuration: src-mac EtherChannel Load-Balancing Addresses Used Per-Protocol: Non-IP: Source MAC address IPv4: Source MAC address IPv6: Source MAC address
... View more
- Tags:
- catalyst_4500
Labels:
02-01-2011
Hello,I've got a problem with a core 6509E and the multicast.A client
has a system with cams for the...
Created by
antoniocanasmartinez
in Switching
01-19-2011
01-19-2011
I changed it;#sh run | inc port-channelport-channel load-balance
src-dst-macbut it doesn't work, I g...
Created by
antoniocanasmartinez
in Switching
01-19-2011
01-19-2011
I tried with 1, 2, 3, and even 4 laptops connected to the 4500 with 1gb
access each.If I use just on...
Created by
antoniocanasmartinez
in Switching
01-19-2011
01-19-2011
Hello,I need to connect 4 physical ports of 1Gb of a 4500 switch to a
dell server with team.The thin...
Public Statistics
| Date Registered | 01-19-2011 08:09 AM |
| Date Last Visited | 10-09-2017 12:14 PM |
| Total Messages Posted | 4 |
