About Brian Millard

Brian Millard · 06-22-2012

We are installing a set of 5508 controllers at one site in Tennessee.At another divisional site we have another controller that covers that division.Both sites utilize the same DNS structure and would like to use the DNS entry CISCO-CAPWAP-CONTROLLER...

Brian Millard · 11-23-2010

We have a 5508 controller on the latest code 7.0.98.0 and several Cisco 1131 access points.Each of the access points are connected to a Cisco switch whether its a 2960 or 2975.We are experiencing output drops from the interface that they are connecte...

Brian Millard · 06-20-2012

Could you explain how to do this with a Windows file server. The one you reference looks like a linux server.

Brian Millard · 11-30-2010

Yes, our controller is on vlan 1 and the AP is native to vlan 417Here are some images.Thanks

Brian Millard · 11-30-2010

Yes, we have brought 3 types of access points into the computer room to observe the issue the 1131, 1242 and the 1252 and the only one that produces the output drops is the 1131.We do have dynamic interfaces on the controller that correspond to the V...

Brian Millard · 11-29-2010

Yes, we have tried multiple ports on the switch. We have about 15 Cisco 1131 access points all are giving the same output drops.We have all of our APs in HREAP mode so that if the controller goes down we don't lose wireless clients.We have several 1...

Brian Millard · 11-23-2010

The problem that we ran into was having the WLAN ID above 8 apparently the 1131, 1242, 1252 cant use WLAN IDs above 8 when utilizing HREAP. Try pulling the WLAN ID down to 8 or below and see if that fixes things.Local Switching:A WLAN on H-REAP is s...

Member Since	‎11-23-2010 07:34 AM
Date Last Visited	‎10-06-2020 12:02 PM
Posts	7

User Statistics

User Activity

Multiple Cisco Controllers Single DNS structure.

Cisco 1131 APs in HREAP mode producing output drops on interface of Switch

Software repository NFS v. 5.3

Re: Cisco 1131 APs in HREAP mode producing output drops on inter

Re: Cisco 1131 APs in HREAP mode producing output drops on inter

Re: Cisco 1131 APs in HREAP mode producing output drops on inter

Re: WLC 5508 H-REAP config problem