Hi,We have SIP Trunks between our CUCM v7.1.3 and IPC Unigy system. All test calls to and from CUCM 7.1.3 and IPC Unigy working fine but have found when dialling from IPC Unigy to either Unity Connection 9.x or UCCX 7.x, the call rings without being ...
Hi,Have recently created SIP Trunks as a means of an intercluster trunk to a third party telephone system.Have created Route Pattern, Route List and Route Group which contains 2 SIP Trunks. Also created New Non Secure SIP Trunk Profile for the SIP Tr...
Hi,Have just uploaded the latest version of Cisco 7937 firmware. Our Call Manager is version 7.1.3 and I uploadedcmterm-7937-1-4-4-SCCP.cop.sgn.I uploaded the file to both of the tftp servers on our Call Manager cluster and restarted the service on b...
Hi,We have a UCCX Express system consisting of 2 servers that has 60 CTI ports and is licensed for 300 IVR ports. Does this mean I am licensed up to 300 CTI ports? Or are the IVR ports and CTI ports licensed separately? If I wish to increase the exis...
Hi,Have user is experiencing problems transferring a fax call from their Cisco 7965 handset to our Rightfax server. Call is passed via H.323 gateway. Both H.323 gateways include the following fax entries in their config;fax protocol t38 ls-redundancy...
Fantastic, that did the job!We now have both inbound and outbound calls working successfully between the two systems. I had previously provided the Publisher IP address to use. This has now been replaced with the IP addresses of our Subscriber server...
Hi All,Thanks for the screenshot, that was most helpful. I made a couple of calls earlier and have captured the traces for one of them.My extension is 6065, phone MAC FCFBFBCBE79A. Destination extension 4431.Phone model is Cisco 7965 and destination ...
Hi Ben,Sorry, ignore my previous post. Please find attached the log from a call attempt from my extension 6065 on a SCCP phone to 4430 which is the destination extension.ThanksJames
Ben,The live system is too busy to do the trace in the CLI. I could do this from our Development system but there are some subtle difference in the partitions & calling search spaces.Do you know what I need to select in Trace & Log Central within RTM...
