About Kevin Haag

Kevin Haag · 06-13-2017

Hi, I'm trying to create a DualStack Environment over our existing IPv4 DMVPN multipoint GRE Tunnel. The Spoke Router can ping both HUB Routers wihtin the same tunnel. So i think the tunnel is working. But i'm not able to exchange the routes via EIGR...

Kevin Haag · 10-25-2013

Hello CommunitySince ca. 2 - 3 weeks we heard about wireless troubles from our customers. Now a few days of troubleshooting later, i don't any idea why this would happen.Our Wireless Controller is an WLC4404 with software Rev. 7.0.220.0 the controlle...

Kevin Haag · 10-03-2012

HI,We have two Cisco Wireless Controller 4404 with the IOS Version 7.0.220.0 and a lot of accesspoints (ca. 170). Now i wan't to reboot a group of Accesspoints where i found over a filter... Is this possible?Or how can i reboot all the AccessPoints a...

Kevin Haag · 06-23-2017

Hi deshtikypshaq Ok now i tried your configuration recommendations :) After i gave the link-local address i was able to exchange the eigrp route to HUB02 but not with HUB01. And i'm not able to ping HUB01 over the link-local or the real address......

Kevin Haag · 06-14-2017

Many thanks to your detailed explanations! I will try it tomorrow when i'm back in the office :)

Kevin Haag · 06-13-2017

Hi deshtikypshaq First thanks for your reply! We just try to do a DualStack Configuration over an IPv4 tunnel do you think this is possible? We tried your configuration hint but with no better result than before, the LOG continous to tell the encapsu...

Kevin Haag · 06-10-2015

Thank you! it solved my problem on an 2960 too :)

Kevin Haag · 10-30-2013

Hi GeorgeThanks for your reply!Now we restarted the WLC's and it seams the problem is solved, but we don't no why :SI would think about your tip with adjusting the MTU size of the EAP packet... I hope it solves the problem with the to big packets... ...

Member Since	‎04-24-2012 08:46 AM
Date Last Visited	‎07-18-2018 05:02 AM
Posts	15

User Statistics

User Activity

IPv6 multipoint GRE Tunnel over IPv4 DMVPN

Wireless EAP issues

Reboot AccessPoints over WLC4404

Hi @deshtikypshaq

Many thanks to your detailed

Hi deshtikypshaq

Thank you! it solved my

Wireless EAP issues