About uthth1971

uthth1971 · 04-23-2016

Need help on downloading SIP Phone config files from TFTT Servers (CUCM) Any help .. much appreciated I have 2 SIP phones registered in the CUCM, but I cannot find the .Cnf.xml file in either of the TFTP server. getting error admin:file get tftp S...

uthth1971 · 02-01-2011

Hi AllI need a help as soon as possible.I am copying a config file from flash to startup, which contains creating vlans and naming them. When I copy from Flash to startup and reload the router I am getting an error as BAD ended file and Vlans are not...

uthth1971 · 07-20-2010

Hi All:Can some one please help me to resolve the issue?I have 2 route groups in a route list for a Dial pattern, but for testing purpose when I shut down one controller , it DOES NOT go automatically to 2nd route group. RL_Toronto--à RG-Tor ----T1 ...

uthth1971 · 07-10-2010

Hi all:Can some one Please help me to resolve this issue.I have configured Unity connection to work in SRST, it is woking okay, but the MWI is NOT working when in SRST.Can some one please direct me how I can get this thing working in SRST.My CCM Vers...

uthth1971 · 06-25-2010

Hi allI would much appreciate if someone can help me to overcome the following issue. I have configured a Cbarge feature in CME and due to the hardware conference issue I am not able to test the feature. It is giving me the error message as “ Failed ...

uthth1971 · 04-27-2016

Nadeem Sorry for the delay, Cisco accepted as it is a Firmware issue with 8861 version 11.0 They are in the process for fixing it Thanks

uthth1971 · 04-27-2016

Jamie: Sorry for the delay, really appreciated for your input. I was able to pull the files fromTFTP. For newer model phones (8861 ) cisco made the config file extension to be Mac.Cnf.xml.SGN I was looking for mac.cnf.xml Thanks again

uthth1971 · 04-11-2016

sorry for the confusion, it was my typo...... I don't have the option ??? RB3003AC1(config-register-global)#no create profile ^% Invalid input detected at '^' marker. RB3003AC1(config-register-global)#no c?call-...

uthth1971 · 04-10-2016

Hi Nadeem, I have the same issue with Cisco 8861 model SIP Phones. I try to do your solution, it is not allow me to issue with this command abc(config-register-global)#no profile ^% Invalid input detected at '^' ma...

uthth1971 · 02-01-2011

you are missing my point................... it is not taking time to create the vlan than waiting at the end of the name string of vlan name for enter key from user...................... until user hit the enter key switch do not know the name of the...

Member Since	‎11-21-2008 09:10 AM
Date Last Visited	‎09-19-2024 03:36 AM
Posts	18

User Statistics

User Activity

Need help on downloading SIP Phone config files from TFTT Servers (CUCM)

copying config from startup giving me error

T1/E1 redundancy in Route List

Unity MWI in SRST - Please Help

Cbarge in CME "Failed to Cbarge In"

Nadeem

Jamie:

sorry for the confusion, it

Hi Nadeem,

Re: copying config from startup giving me error