Hi folks,
Our SWSS or SmartNet subscription have already lapsed, we're planning to get a SWSS renewal for the system and the users. I'm pretty sure that there are still CUCM v9.x Smartnet SKUs. Can we just renew SKUs and maybe perform any upg...
Good day to all of our netpros here!I was at a client's side, and there are two scenarios. I just would like to know your take on this. I did a network redesign for one of our client's. I created the 192.168.8.0 0.0.7.255 network (192.168.8.0 - 192...
Hi All, We recently encountered a problem regarding fiber optic modules and connectors. We plan to overhaul our very simple network infracstructure using Cisco Switches. Done some research and stuff about the product line. We ordered 3750G for ou...
Hi netpros here at CSC. Good day to all of us.I am a neophyte in the networking field and I live in the Philippines, where networking isn't as intense as in other countries, so please bear with me for my lack of knowledge and experience. I have a que...
Hi all, Good day to the Cisco Support Community AKA Netpro . I am not so sure where to post my question because it spans of two major topics. One is webhosting and the other one is NAT-ing. You see we have a problem, currently, we have a Pix 515E...
I can't clearly visualize the topology. I assume that this looks like a point to point topology, am I correct? If yes, then please make sure that router A has routes for it to take clients to the other side. Same thing with router B. You should have ...
Hi there, the config seems to be fine. Since the error shows some misconfigs on the STP/Spanning-Tree Part, maybe you could try to check on any STP configurations discrepancies per port on the Cat3012, and compare it with the STP port configs on the ...
