About work

work · 12-08-2010

Hi,I am looking for some clarification on how the Palo VIC presents the vNICs, how to tell/control which vNICs map to which physical ports, and how to best configure my environment for VMWare.Hardware Summary :B250 (full width) blades with 2 Palo VIC...

work · 02-07-2011

Manish,related question - what happens if you want to have FCoE storage ports AND the native FC expansion module ?eg - FCoE direct to the disk array to allow blades to get SAN access using FC switching mode, but also NPV/end-host mode to allow a nati...

work · 01-14-2011

Ken,I noticed the same thing with my iSCSI QoS assignment : ie until the best effort policy supports jumbo frames, the others wont either. [this caused me some major headaches trying to connect my ESX hosts to the EMC storage!]having said that (i hav...

work · 01-04-2011

Jeremy,I did some more digging and found the cause of my ISCSI woes.I have my QoS policies set with VMWare Data NICs getting best-effort, and ISCSI getting gold.best-effort was 'normal' MTU, gold was 9216 MTU.once I changed best-effort to be 9216 as ...

work · 01-04-2011

Hi Rob,my system was a 1.3.1(o) upgrade to 1.4.1(i) - looks like all ports are in grace period - not a single one has valid license.roberbur_20110105085058_CORE1NS-UCS01_UCSM.tar uploaded to ftp site for reference************************** EDIT : i c...

work · 01-04-2011

Hi Tim,According to VMWare documentation, vSphere only supports 4 10gbit interfaces (regardless of chipset) - im guessing from your post that your old environments had 1gbit NICs ?my experience with B250 (full width) blades in UCS and vSphere 4.1 ins...

Member Since	‎12-08-2010 02:21 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	9

User Statistics

User Activity

UCS/VMWare build question

Re: FCoE Storage Ports & FC end-host mode

Re: QoS issues

Re: New UCS and VMware setup Questions

Re: UCS 1.4.x - Licensing Issues

Re: New UCS and VMware setup Questions