About pvoss

pvoss · 03-19-2019

I want to put the latest software Bundle on my IR829 by using ROMMON-1 and a USB drive.The router has not responded to the Break key or CTRL / Break in the first 60 seconds of power on.I have also been able to use the config-register to start in ROMM...

pvoss · 02-18-2009

I have a 2600 with a PRI terminated and on a second 2600 on the campus I want to send a fax to the FXS port. What is the proper methodoloy for this? I wanted to translate and send to a dial peer but don't see how to a second router.Thanks for any gui...

pvoss · 07-10-2008

In the agent desktop there is a checkbox, "dial number as entered" that I want to be checked when the application is started. How do I do this?

pvoss · 09-11-2019

USB has to be 2 gig or less.

pvoss · 09-11-2019

Just wanted to provide an update to what I have worked out.For an IR829 to put in Rommon-2 mode change the config-reg to 0x0 otherwise known as manual boot.To then traverse to Rommon-1 change the BOOT_HV= file name to any valid name on flash. This ca...

pvoss · 03-20-2019

Disappointing that the only way to use a USB is to take a working system and break it.Thanks for the link, I have tftp upgraded before and it looks like I will be in the future.Too bad since USB is so much faster.

pvoss · 02-24-2009

This was a site router with CME and CUE configured at one time. With consolidation, it is currently a router on a stick used for overhead paging through an FXO (works) and the FXS that was just added for a fax machine. I've removed the sccp and shutd...

pvoss · 02-24-2009

The show dp v sum is UP UP.I've rearranged the dial-peer order, I've changed the dp in different trys.The call comes in on the voip dial-peer and will not go to the FXS.I can call fxs port to fxs port, so the destination dp works. The voip dp is not ...

Member Since	‎07-05-2006 06:40 PM
Date Last Visited	‎10-18-2020 11:35 AM
Posts	12
Total Helpful Votes Received	5

User Statistics

User Activity

Put IR829 into ROMMON-1

Campus Faxing

agent desktop changing dial number as entered

Re: Put IR829 into ROMMON-1

Re: Put IR829 into ROMMON-1

Re: Put IR829 into ROMMON-1

Re: Campus Faxing

Re: Campus Faxing