About pblaser

pblaser · 09-06-2022

problem:I would like to add a transparent mode Firewall in between the L3-Gateway (default GW for all Networks) and the L2-FTTH network. reason: I need to firewall the communication from-to the FTTH network of this all subnets, so the traffic is not ...

pblaser · 02-28-2017

hy, I am facing a problem on the C800 platform C887VA mainly with SNMP 3 errors "%SNMP-3-INPUT_QFULL_ERR". I have seen lot's of discussions in Switching-Platforms. has anyone the same problems on C800 platforms? who did you solve it? we are running ...

pblaser · 09-07-2022

SOLVED !

pblaser · 11-18-2021

I have exact the same problem:Join Operation Failed: A service is not available that is required to process the request Error Name: LW_ERROR_KRB5KDC_ERR_SVC_UNAVAILABLEError Code: 41759Cisco Identity Services Engine-----------------------------------...

pblaser · 02-28-2017

-- thanks for the discussion --

pblaser · 02-28-2017

thanks for the answer, I though about that as well, but lisp is not running like I need it... I may have found something... after I installed the IOS 156.3M1 the MIB on the router may have changed (this happen), but my NMS is still trying to get the...

pblaser · 02-28-2017

I have tryed: SNMP: SNMP Detail debugging is on SNMP IF-MIB Errors debugging is on SNMP IF-MIB Trace debugging is on SNMP CISCO-IF-EXT-MIB Errors debugging is on SNMP CISCO-IF-EXT-MIB Trace debugging is on SNMP packet debugging is onSNMP MGR request...

Member Since	‎05-20-2016 03:59 AM
Date Last Visited	‎03-13-2024 12:02 AM
Posts	9
Total Helpful Votes Received	5

User Statistics

User Activity

transparent mode L3_GW - L2_Net / fpt 1010 ASA-code

SNMP 3 errors %SNMP-3-INPUT_QFULL_ERR on C887VA

Re: transparent mode L3_GW - L2_Net / fpt 1010 ASA-code

Re: Error joining ISE to AD domain

-- thanks for the discussion

thanks for the answer, I

I have tryed: