Please see attached.

Can you post running configuration?

I just tried that on my FPR 2110 and it does work. What's the extact IPv4 address you are entering?

It's very unclear of what you want, are you looking to forward these ports where people can access r...

I tried it on mine and it worked fine but I mostly configure it via CLI. Why don't you do this:- Log...

Can you check if this helps you out? It's more of a Windows issue than Cisco's. I had same issue wit...

You can use the latest ASDM available for your 5520 i.e. asdm-781-150.bin. Matter of fact, I have AS...

Here is my running-config ip local pool vpnpool 10.100.21.50-10.100.21.200 mask 255.255.255.0 ! inte...

I added running-config specific to webvpn

It's allowed\, please check running-config and let me know if any issues.

Is the VPNPool part of the network assigned to the Inside Interface ?No, it's a totally different su...

Here is my running-configip local pool vpnpool 10.100.21.50-10.100.21.200 mask 255.255.255.0!interfa...

Thank you for the quick reply but I would really appreciate if you could just guide me through this....

Hi,I recently configured AnyConnect on ASA 5510, 5512 and 5505 with split-tunneling and it's working...