Hey Folks, Please post screenshot of F2, Advanced page, it should look like mine.--> Assuming the M.2/MSTOR is seated correctly and the Drives are working properly <--   A few things to verify: "The embedded SATA RAID controller requires that the ser...

Hey Folks,   So 13% in Discovery is generally going to be Hardware; MLOM, VIC, CPUs, DIMMs or Motherboard. The problem could be at the UCSM, Firmware or Chassis level, but I'd eliminate Hardware first.   Check the SEL Logs and the Faults Tab, for any...

Hey Folks, I'm not 100% sure if you're trying to have 2 Domains, 1 with 62xx FIs, 1 with 64xx FIs or if you're trying to replace the 62xx with 64xx. So hopefully something below will help you.   https://www.cisco.com/c/en/us/td/docs/unified_computing...

For those using the emulator and have an actual Hypervisor (ESXi) not Workstation... If you suspend your session, you can restart your session and your configurations will be available across reboots of that host. So suspend the VM, put the Host in...