About richard.kirchner1

richard.kirchner1 · 11-11-2015

Good Day Everyone. We have IPICS installed an running via an LMR and analog Kenwood radio repeaters. We are now in the process of changing over to the digital repeaters. What I cant seem to figure out is connecting the digital repeaters to the system...

richard.kirchner1 · 04-23-2015

Good Day AllNeed some help in understanding how to use the REST services API.I need to send custom commands to a camera to do certain PTZ functions. If someone could point me in a direction with some examples that would be great. I am working through...

richard.kirchner1 · 03-01-2015

Good Day EveryoneWe are currently porting over our current bosch CCTV system to VSM and have had a problem regarding the bosch VipX1 XF encoder and the MIC-400/412/500 range camera. Eventhough we add the cameras using the cisco 4-port encoders, it se...

richard.kirchner1 · 04-07-2015

We will start playing around with the controls/commands and have a look what we can get out if the system. Will keep you guys updated.Thanks again for the reply

richard.kirchner1 · 04-01-2015

Hi Scott thanks for the reply. I have connected the camera to the cisco 4 port enc. Thus far I have basic PTZ control, what I am looking to do is use the built-in pre-sets for the camera, with regards to the Bosch Mic 500 range camera, I need image f...

richard.kirchner1 · 04-01-2015

Have you solved the problem? I had a similar issue, what I did:Uninstalled the multipane client, ensured the cisco IE add-ons for cisco were enabled. After that it was some security settings that we needed to change on IE to allow connection ( import...

Member Since	‎03-01-2015 10:46 PM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	8

User Statistics

User Activity

IPICS and Kenwood Digital

VSM 7.6 REST API

Bosch interface to VSM

We will start playing around

Hi Scott thanks for the reply

Have you solved the problem?