sh proc cpu sorted | e 0.0CPU utilization for five seconds: 100%/4%; one minute: 93%; five minutes: 91% PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 97 219766924 1652368 133002 92.92% 76.46% 76.91% 0 CEF ScannerSU...
To follow up, the issue went away. I am rather disappointed as i need to understandwhat happened. If it happens again i will post.. If anyone has experience CEFSCANNER 90% for a long periodand fixed please reply.ThanksChris
after debugging the issue: debug ppp negotiation, the output suggested i had a AAA authorization issue. Once i saw the problem with this portion of the config, i addedaaa authorization network NOAUTH none!interface Serial1/0:0 ppp authorization NOAUT...
I have two T1's similiar to above. I have added MLPPP to routers on both sides and cannot seem to bond.I have removed one of the T1s so i could remotely connect to far side, and work on adding one t1 to MLPPP but cannot get it to work.Here is output,...
