I am having trouble with a wlan at one of our locations. This problem occurs randomly with most of the users there but in the example below I have included the most troubled. The clients experience awful wireless performance and response times for ...
Hi,I have a 3750 stack that connects to a 3560 at another site. The are both on the inside of our network and basically a switch to switch connection. The switchports are in vlan 901. When I telnet from the 3750 to the 3560 and attempt to change t...
I have a remote site whose wlan consist of a 2112-WLC and twelve 1142N's. The issue I am seeing is that several clients will associate continuously throughout the day. This does not occur for any specific client or ap. These multiple association...
I have an VMWare version of ACS 5.1 for Windows that Iam trying to change the ntp server on. I enter the ntp server (ip address) command and restart the acs.When it reboots and I enter sh ntp it says it is synched to the new ntp server but the clock...
I have 5 WLC's (3-2100, 2-4400) and need to synch the NTP server ip addresses on them. I know how to do this but have a question. Using the gui, once I apply the change to the NTP ip address and save the changes, will the WLCs need to be rebooted f...
Thanks for the input Steve. I still haven't quite got the exact cause of the issuenailed down but I am making a visit to the site this week because I have discovered a possible source of interference at the location.Thanks again for your response.Le...
Mikael,Thanks for getting back with me. Here are the interface configs:remote 3560-------------interface GigabitEthernet0/22 switchport access vlan 901 speed 100 duplex fullinterface Vlan901 description Connection To Corporate ip address 10.255.255....
Mikael,Below are the outputs of the show ip route and show ip eigrp topology commands. Two things that I have noticed are:1- On the core 3750 the following are present for the show ip route: 10.0.0.0/8 is variably subnetted, 104 subnets,...
