Hi,
I am trying to get wireless endpoint details based on the MAC address using ISE 2.3 ERS API. As you can see below the API result doesn't give me the endpoint IP address.
However, the endpoint IP address is available for the wired users a...
Hi,
I am trying to get endpoint details based on the endpoint IP address using ISE 2.3 ERS API. I am able to get the endpoint details by passing the MAC address as below. I use Postman to send the get request.
https://ers-username:ers-password@i...
Hi All,
We recently enabled device-sensor feature on our Cisco Catalyst 3850 switches running IOS Denali 16.3.5b. For some reason ISE doesn't receive DHCP/CDP information of the endpoints. Has anyone experienced this issue before? Here is the switc...
Hi Paul, My customer has over 10000 PCs across their network. So, my approach would be the option 3. However, my implementation is a bit different. I have created an Endpoint Identity group lets say PXE_Devices which is used in the authorization poli...
What is the best practice for the authentication order and priority for PXE boot? Shall we configure mab for the first order and dot1x as the first priority. authentication order mab dot1xauthentication priority dot1x mab
Hi Jason,
Yes, I can see the IP address under the RADIUS live logs for wired devices. As far as I know, the WLC has been configured according to the Cisco best practice and the radius accounting has been enabled as well.