About Jared McPhail

Jared McPhail · 09-13-2020

Has anyone had problems with viewing ASA settings using ASDM after full SSL inspection from a third party device was turned on? We have a Checkpoint NGFW that’s sole purpose is content filtering and ssl inspection. It sits on the inside of our netwo...

Jared McPhail · 02-14-2017

What is the recommended version of IOS to be used for stacking 2960S and 2960X switches?

Jared McPhail · 02-20-2017

Thanks Alan that worked. They stacked as soon as I set the 2960X stack port speed to 10.

Jared McPhail · 02-16-2017

Picture of stacking cables connecting the switches together.

Jared McPhail · 02-16-2017

This is the output from the 2960X Switch/Stack Mac Address : 689c.e296.9300 H/W CurrentSwitch# Role Mac Address Priority Version State----------------------------------------------------------*1 ...

Jared McPhail · 02-15-2017

That is them stacked. I have to connect to each switch through the console port to get the "sh ver" off of each switch. They're not stacking, even though I have them connected up to each other. That's the problem I don't error message.

Jared McPhail · 02-15-2017

Cisco IOS Software, C2960X Software (C2960X-UNIVERSALK9-M), Version 15.2(2)E6, RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2016 by Cisco Systems, Inc.Compiled Fri 16-Dec-16 21:27 by prod_rel_teamROM: Bo...

Member Since	‎11-19-2012 11:56 AM
Date Last Visited	‎09-13-2020 11:32 AM
Posts	9

User Statistics

User Activity

ASDM vs. Third Party SSL Inspection

Stacking 2960S and X switches

Thanks Alan that worked. They

Picture of stacking cables

This is the output from the

That is them stacked. I have

Cisco IOS Software, C2960X