Hi,
in XR 4.3.2 I used to have :
group mygroup
router bgp '.*'
neighbor '.*'
!
!
end-group
to match all neighbors (IPv4 + IPv6)
but I can't make that work with XR 5.3.1 which seems to check the regexp on "neighbor" very hard:
myrtr(con...
Hi, I can't seem to find an OID to monitor transceiver optics RX/TX as "dbm" on IOS-XR like we can do on catalyst/IOS devices for exampleENTITY-SENSOR-MIB only seems to report celsius/amperes/watts/voltsDC sensors ? thanksMik
thanks Xander,
all was fine, just did not know the OID to poll :)
so I got it this time :
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.2630860 = INTEGER: 425
which correctly match :
RP/0/RP0/CPU0:xxxx#show controllers te0/10/0/4 phy | i Power
...
