Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
Roland.Corbet
Level 1
Level 1
Member since ‎09-21-2009
‎07-04-2018
Recent Badges
Awards

User Statistics

  • 7 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received

User Activity

VPN Traffic Policing between two ASA 5510s (Traffic doesn't match tunnel group)

11-20-2012
Hi,We have two ASA 5510s in separate locations, connected across the internet.We have a site-to-site VPN between each of the ASAs that enables a SAN device at each end to replicate data to the other.The replication, when running, will consume all ava...

Best Practice for Segregating Hosts in a DMZ using an ASA5510

12-06-2010
We are about to deploy a Microsoft Hyper-V High Availability cluster and I want to understand how my thinking on segregating the servers in the DMZ aligns with best practice.Each server in the Hyper-V cluster follows best practice and has a dedicated...

Default Gateway Configuration Between ASA 5510 and Dell PowerConnect 6224

09-02-2010
We have the following equipment, with a number of VLANs running on top:ASA 5510|DellPowerConnect 6224 (acting as a layer 3 device to route traffic between vlans and act as switch for servers etc.)|Catalyst 2960 (acting as layer 2 switch for desktops ...

Catalyst 2960 to Dell PowerConnect 6224 VLANs - Are Two IP addresses needed?

06-28-2010
We have configured a VLAN trunk between a Catalyst 2960 and Dell PowerConnect 6224.  This works fine, and we can route between VLANs etc.The PowerConnect 6224 is providing L3 routing functionality, and the default gateway for the subnet - e.g. 192.16...
Community Statistics
Member Since ‎09-21-2009 09:11 AM
Date Last Visited ‎07-04-2018 12:05 AM
Posts 7