About Loomit

Loomit · 03-26-2019

Is there a command on NX-OS for switch to become a TFTP Server like on Catalyst IOS tftp-server flash:"filename"

Loomit · 05-12-2017

Hi folks Every time we upgrade OS on the Riverbed Steelhead and reload it the clients which get IP from a remote anchor WLC stop working. Local WLC shows 0.0.0.0 for guest clients until it is rebooted and DHCP suddently starts assigning IPs again. No...

Loomit · 12-21-2016

We have a laptop connected to a 2248 FEX. I know it is not standard but at least there should be some activity on the port, however it is still down. The port is in spanning-tree port type edge auto/auto and obviously the FEX is online. The laptop su...

Loomit · 11-19-2012

We added a new controller to the group which we want to be as a secondary for all WAPs. How can I set it up so that I don't have to go to each AP individually? Can this be done on the controller or from the WCS?

Loomit · 12-21-2016

Hi Wesley The issue was the FEX is dual homed which I didn't realize and I configured the vlan on FEX port only from one N5K and not from the other, then the port came up. Thank you for your interest.

Loomit · 05-14-2015

We also have a pair of 4500X VSS and recently upgraded them to cat4500e-universalk9.SPA.03.07.00.E.152-3.E.bin as a verified stable version.

Loomit · 11-21-2012

Stefan, LeolaohooThank you guys, I appreciate your answers. I used templates and it worked fine..

Member Since	‎02-17-2012 03:57 AM
Date Last Visited	‎04-03-2019 01:03 AM
Posts	7
Total Helpful Votes Received	5

User Statistics

User Activity

How to make N9K as a TFTP Server

Guest clients stop getting IP

computer to FEX

How to set up secondary WLC for all APs at once?

Hi Wesley

We also have a pair of 4500X

How to set up secondary WLC for all APs at once?